Keep cool with the latest addition to the ClearSonic Lid System. The AirKing Fan clips easily onto the S5-2 SORBER panels to increase air circulation. The 6" fan has two speeds, adjustable tilt, and a 360 degree pivot. The fan can also be easily wall- mounted.
Fan

ClearSonic offers both hard and soft cases for our acrylic shields and soft cases for SORBER baffles. Great for protecting panels during transportation or storage.
Click here for more info.

Cases
Cleaning Supplies & Gloves

Sprayway Glass Cleaner is safe on all plastics and glass and will leave no film on your ClearSonic acrylic panels.

One strand of the Rainwipes Microfiber Towel is several hundred times smaller than a fine strand of cotton fiber. The hypo-allergenic, non-abrasive wedge shaped microfiber scoops lift and trap dirt, dust, grime and moisture without scratching. The fibers are lint free and non-abrasive. Microfiber towels can be used wet or dry, are extremely durable, and can be washed up to 500 times.

Avoid fingerprints and extend the life of your ClearSonic Panel with ClearSonic one-size-fits-all brown jersey gloves.

The CP1 ClearPac includes all of these items at one low price.

Replacement Hinge
All ClearSonic Panel systems features our own low-profile, heavy duty "mechanical lock" full-length hinge that is the best in the industry. ClearSonic Panels go through an extra step in the manufacturing process that creates a "locking groove" on the long edge of the panel. This locking groove accommodates a hard tooth on the inside of our proprietary hinge that snaps into the groove for a superior, longer lasting hold. Some of our competitors use the inferior "friction-hold" hinge that uses flexible barbs and friction to hold onto the shields. Friction-hold hinge must be applied with force and will only stay in place as long as the hinge opening is smaller than the panel thickness. The problem is, plastic has a memory and over time will open up under the stress. Once the hinge opens up, it no longer will hold tight and will start to pop off more and more frequently. We know. We used friction-hold hinge until early 2000. At that point we made the decision that this style of hinge was not durable enough to be used on the industry standard ClearSonic Panels. We want our systems to perform for years, not just months. In the event that there is a problem with the hinge, we stock both new-style and old style.



When ordering replacement hinge, please specify which type you need. If your hinges snap into a groove that runs the full length of the panel you'll need 'new-style'. If the panel thickness is 1/4", but there is no groove, 'old-style' hinge will work. If you have any questions, please contact us.
Flector 12

FLECTOR 12 is an 11.625 inch diameter transparent disc made from a 0.1 inch thick polycarbonate.

This FLECTOR is designed to reflect sound back to the musician so they can hear themselves better, while at the same time diffusing the narrow high energy acoustical beam associated with brass instruments, making life somewhat more bearable for anyone directly in the "line of fire".

The FLECTOR has the added benefit of reducing the potential for feedback by deflecting monitor foldback sound away from the back of the mic.


The FLECTOR 12 is great for vocals, too!
Please Note: ***FLECTOR 8 is unavailable until further notice***
Our short GN6 gooseneck may be useful to help position the microphone and FLECTOR at the best angle.

T-Base22
Our new T-Base22 stabilizing base channel is designed to anchor your ClearSonic drum shield in place. Each clear acrylic panel slides down into the grip-tight holder along the top edge of the T-channel. The T-channel has a self-adhesive strip on the bottom face, or we recommend that self-tapping screws be used for a more permanent installation.
9